CONTINUOUS HINGES
with HOLES

PLAIN CONTINUOUS HINGES with HOLES

Series	Gage	Pin Diameter	Knuckle Length	Open Width	Length	Screw Size	Steel	Stainless Steel T302	Aluminum
534H	.042	.091	.500	1.25	72"	#4	S	SS	A
535H	.042	.091	.500	1.50	72"	#4	S	SS	A
536H	.042	.091	.500	2.00	72"	#4	S	SS	X
634H	.060	.120	.500	1.25	72"	#6	S	SS	X
635H	.060	.120	.500	1.50	72"	#6	S	SS	A
636H	.060	.120	.500	2.00	72"	#6	S	SS	A
638H	.060	.120	.500	3.00	72"	#6	S	SS	A

All holes are 2" on centers, drillled and countersunk
for flat head screws and opposite each other.

Items marked S, SS and A normally available from stock.
Items marked X available on special order, not available from stock.

STEEL PRE-PLATED CONTINUOUS HINGES
with HOLES

Series	Gage	Pin Diameter	Knuckle Length	Open Width	Length	Hole Size	Centers	Hole Pattern	Finish
30075	.042	.091	.500	1.06	72"-96"	#4	2.00	Opp.	Brass
30095	.042	.091	.500	1.06	72"-96"	#4	2.00	Opp.	Nickel
35075	.042	.091	.500	1.50	72"-96"	#5	2.00	Opp.	Brass
35095	.042	.091	.500	1.50	72"-96"	#5	2.00	Opp.	Nickel
36075	.042	.091	.500	2.00	72"-96"	#5	2.00	Opp.	Brass
36095	.042	.091	.500	2.00	72"-96"	#5	2.00.	Opp.	Nickel

All holes are 2" on centers, drilled and countersunk
for flat head screws and opposite each other.

ELECTRO-GALVANIZED HINGE

Series	Gage	Pin Diameter	Knuckle Length	Open Width	Length
535SEG	.040	.091	.500	1.50	72"
536SEG	.040	.091	.500	2.00	72"
635SEG	.060	.120	.500	1.50	72"
636SEG	.060	.120	.500	2.00	72"
638SEG	.060	.120	.500	3.00	72"

Pins are also Electro-Galvanized.

FOR PICK-UP OR SHIPMENT TODAY CALL:
1-800-282-0099

5411 Walnut Ave.	Telephone: (630) 968-1133
Downers Grove, IL 60515	Fax: (630) 968-1333